Fully Registered
Fully Insured
Since 2001
Email Enquiry
Please submit the form below to make an enquiry. A C&F team member will contact you shortly to deal with your question.
×
A flat roof is constantly exposed to humidity, ultraviolet degradation, weathering, acid rain attack, mechanical wear and ongoing movement stresses, due to temperature changes. As a result, most flat roofs are leaking and require renovation.
The MariSeal System is a group of coatings based on Polyurethane resins, which used in combination, creates a seamless membrane on the flat roof, that protects the building structure reliably and on a long term basis, even under the most difficult conditions.
All the waterproofing coatings of the MARISEAL SYSTEM cure to form permanently elastic, seamless membranes providing waterproofing on a long-term basis, even to the most difficult and problematic details.
While other waterproofing membranes or systems fail at these difficult detail areas, the MARISEAL SYSTEM has proven itself to perform, even in the most extreme climatic zones on the planet.
The MariSeal System can be used on:
• Roofs, Balconies and Terraces
• Wet areas
• Water tanks
• Flowerbeds
• Public Walkways
• Foundations, etc.
MARISEAL® 250 is a premium, liquid-applied, highly permanent elastic, cold applied / cold curing, one component, polyurethane membrane used for long-lasting roof waterproofing. A solvent based, polyurethane roof waterproofing coating technique, MARISEAL® 250 is based on pure elastomeric hydrophobic polyurethane resins. This unique method delivers superb mechanical, chemical, thermal, UV, and natural element resistance properties. MARISEAL® 250 cures by reaction with ground and air moisture.
MARISEAL® 250 FLASH is a premium, semi-thixotropic, liquid-applied, highly permanent elastic, cold applied / cold curing, one component, polyurethane membrane used for long-lasting waterproofing. . A solvent based, polyurethane roof waterproofing coating technique, MARISEAL® 250 FLASH is also based on pure elastomeric hydrophobic polyurethane resins, engendering all the same quality mechanical, chemical, thermal, UV, and natural element resistance properties of MARISEAL® 250. Curing by reaction with ground and air moisture, MARISEAL® 250 FLASH is semi-thixotropic for use in sloped surfaces.
MARISEAL® 420 is a pigmented, wear resistant, semi-rigid, color- and UV-stable, weather invariable, cold applied / cold curing, one component, aliphatic, polyurethane top-coat for the protection of exposed waterproofing coatings, subject to high wear conditions. MARISEAL® 420 cures by reaction with ground and air moisture via a unique moisture triggered chemical reaction.
MARISEAL® 400 is a pigmented, color- and UV-stable, highly permanent, elastic, cold applied / cold curing, one component, aliphatic, polyurethane top coat utilized for exposed, polyurethane waterproofing coatings. Curing via a unique moisture triggered chemical reaction with ground and air moisture, MARISEAL® 420 provides efficient protection, particularly where a final dark finishing color is desired.
Click on each image!
Please submit the form below to make an enquiry. A C&F team member will contact you shortly to deal with your question.
×